Signaling and Safety

TM11 – Control box TM96/1 – TM07/1

Certified by the Italian Railway Network to coordinate the position of the points on the switches.

TM11 – Control box TM96/1 – TM07/1

Control boxes TM96 and TM07 from Tecnologie Meccaniche are devices approved by the Italian Railway Network to control the position of the points of the switches.

The control boxes are installed on the switches along with a switch, stop and needle control device and are used to constantly check the correct position of the needles. The functions they perform can be of two types: needle position control or needle tilt control. The “/1” versions control only one needle position (stopped or deviated) and differ from each other (TM96/TM07) by the type of system on which they can be mounted.

It performs the Position/Height Control function if inserted in the needle frame of “P75” type machines.

It performs the Tilt Control function if inserted in the needle frame of the “SO1” type machines.

It performs the Tilt Control function if inserted in the needle frame of “SO4” type machines.
The TM07/1 version is used in switch systems with the V420B system layout and is combined with the Mushroom Contact Device mounted on switches 60/0.074 or 60/0.094 and has the Needle Position Control function only.

Project Info

Category: